Furniture / IKEA MALM
IKEA MALM drawer organizer
A 3D-printed Gridfinity organizer sized for the 80 cm wide MALM chests of 3, 4 and 6 drawers. Open the designer with this drawer already filled in, add your bins and download the STL files.
Design your IKEA MALM organizer
The drawer
| Inside width | 720 mm |
|---|---|
| Inside depth | 430 mm |
| Height to start with | 100 mm |
| Gridfinity grid | 17 × 10 squares |
| Rim left and right | 2.5 mm |
| Rim front and back | 4.5 mm |
Width and depth from IKEA's product page: 72 × 43 cm inside. IKEA does not list the inside height, so the height here is a safe starting point; measure yours. Source.
How it works
- Open the designer with the IKEA MALM size filled in, and check it against your own drawer.
- Drag in bins, draw your own, or type what goes in and let Draweroo plan it.
- Download the files. The baseplate is split to fit your printer bed, with seams on grid lines.
Questions
How big is the inside of a IKEA MALM drawer?
About 720 × 430 mm. Width and depth from IKEA's product page: 72 × 43 cm inside. IKEA does not list the inside height, so the height here is a safe starting point; measure yours.
How many Gridfinity squares fit in a IKEA MALM drawer?
17 × 10 squares of 42 mm, with 2.5 mm left over on each side and 4.5 mm at the front and back. Draweroo turns that leftover space into a solid rim, so the baseplate sits tight.
Do I need to measure my drawer?
Yes, please check. Furniture changes over the years and between countries. Measure the inside with a tape, or use "Measure with a photo" in the designer.